• lucialu@laiyiextrusion.com
  • +86-519-86819870

The Maintenance Steps Of Laminating Machine

The Maintenance Steps Of Laminating Machine

Paper Extrusion Coating Laminating Machine

Laminating machines require attention as most of the laminators steam right along. It is best to keep the laminating machine clean so the dust and grit do not entre and spoil the lamination. Moreover, excessive dust and grit disturb moving parts of the machine, eventually which is not good at all. For the maintenance, China laminating machine supplier provides a proper guide book to each customer. Moreover, a specific team is assigned to the customer services for the maintenance of the laminating machine. The process of cleaning the laminating machine is not much difficult but yes, it’s important for work efficiency.

If you know the laminating machine, you know that it is a user-friendly machine. But when it comes to cleaning, the situation is totally different. You need to put effort to maintain your laminating machine to extend the working life ability and RIO at the same time. Either you have a wide-format laminating machine for business or a pouch laminating machine for home, properly cleaning ensures that work quality stays top-notch. Moreover, it results that each laminating material comes out scratch-free, and work smoothly. To clean the laminating machine, a good rule of thumb is best for every three to six months.

Steps to maintain laminating machine:

Here are just three simple steps to maintain or keep a laminating machine in good working order:

Let the machine cool down:

For external or internal maintenance, the first thing is to make sure that the laminator machine has been turned off. You need to unplug it to cool it down. In this way, you can clear the dust and grit out without calling for service. After unplugging the machine, you should wait twenty to thirty minutes. Remove the safety guard or covers of the laminating machine, if needed.

Remove the firm:

Without any threaded turn on the laminating back through the unit. When heated once, you can use a cleaning block to remove film plastic parts that may have got stuck in the rollers. To set the machine, make sure to reverse to get all the spare lamination out.

Cleaning the rollers:

Naturally, at the edge of the rollers, adhesives bleed out after running some couple of laminating film rolls. The glue builds up and gets hardens and contributes to jammed pouches. It is easy to peel off newer deposits than removing the hardened once, so regular cleanup makes work easier.

To a warm state, preheat the machine for just one or two minutes. The heat softens all adhesive and makes it easy to remove. Then simply, scrub off the adhesives by using liquid soap with a cleaning block, a lint-free cloth, or any pad like Scotch-Brite. You need to roll the rollers throughout the cleaning process. In this way, each section of the machine cleaned. Do not apply pressure to clean, instead scrub gently the rollers clean. Moreover, do not use any kind of sharp tool for cleaning as any nicks on the rollers can permanently damage and cause creasing in laminating materials. Keeping the machine maintained is easy when you have done it once. All you have to do is to scrape adhesives, film or ink off from the rollers or machine.

Inquire Now